HansiBond® SMP 640 is a one-component, stable adhesive and sealant based on a silane-modified polymer for indoor and outdoor use, which crosslinks with air humidity to form an elastic material. HansiBond® SMP 640 can also be processed as a boosted material using a mixing and dosing system. This product is label-free!
HansiBond® SMP 640 is a universally applicable adhesive and sealant that can be used for elastic bonding of metals, wood, glass, plastics and ceramics. The product is our all-rounder for the construction sector.
Highly recommended for construction work, It is ideally suited for filling joints, bonding materials, and sealing gaps.
Sizes available:
290 ml PE cartridge
600 ml foil bag
20 L bucket
200 L barrel,
others on request
Our universal SMP adhesive and sealant is distinguished by its exceptional initial adhesion to almost all standard and painted substrates. It offers outstanding resistance to UV exposure and direct contact with water.
This product can be painted over, making it highly suitable for renovation work.
HansiBond® SMP 640 can also be boosted with HansiBond SMP 501 as a 2K version with 50:1 or 10:1 ratio.
Surface preparation:
Surfaces must be clean, dry and free from grease, oil,
dust and contaminants.
Curing conditions:
The optimal processing window is between 20 and 30 °C and 40 to 70% relative humidity. Below 15 °C, the curing times are significantly longer.
The elastic properties of the adhesive can only be achieved if the adhesive is applied in sufficient thickness. This depends on the level of mechanical stress. Typical adhesive thicknesses are between 1 and 5 mm.
Storage conditions:
The product must be stored at temperatures between 10°C and 30°C.
Fill out the form to get the data sheet via email and reach out if you have further questions.